Data logger with dual RS232 sniffer T-box
The dual T-piece is already connected to the 2xRS232 data logger box and branches off all data from an RS232 line in parallel to forward it to the Avisaro data logger. Depending on the data logger connected, rx (receive line) and tx (transmit line) can be recorded simultaneously and saved in a file or transmitted via WLAN. D-Sub 9-pin connectors or WAGO cable clamp connectors can be used.
The picture shows the data logger "Avisaro 2.0 Box" with the sniffer T-piece plugged in (in the picture the rear box with the connected cables). The connected "Avisaro 2.0 Box" data logger is required for operation.
Supplied with 2 Wago terminals, without cable, power supply unit or SD card.Datenlogger mit Dual-RS232-Sniffer-T-Box
Quick Guide - a compact introduction to M2xx33
This is an overview guide on how to use the Avisaro device:
QuickGuide (pdf)
Support: documentation, software and firmware
Complete technical documentation, firmware updates und PC software:
Link (html)
-
RS232 Interface
:
-
- Industry standard RS232 interface(s)
- Baud rate 1200 bit/s to 1 Mbit/s
- Average processing rate max. 500 kbit/s
- 7/8 data bits, parity, stop bits
-
Connection - WAGO Terminals
:
-
- Two connection terminals type WAGO 734
- Industrial terminal for single cable
- Optional: Adapter from WAGO to D-Sub
- Alternative: 1x connection terminal type WAGO 734 and 1x RJ45 socket
-
Power Supply - WAGO
:
-
- Power Supply via WAGO Terminal
- Optional: Adapter from WAGO to D-Sub
- Versorgungsspannung: 6V - 32V DC
- Verbrauch: ca. 0.5 bis 2 W je nach Ausstatttung
- Echtzeituhr intern gepuffert
-
Mechanical data "Box 2.0"
:
-
- Dimensions: 50 x 72 x 24 mm
- Weight: 70 g
- Protection class: none
- Temperature range: -30 ° C to 85 ° C (check SD card for restriction)
-
Storage medium (SD cards)
:
-
- Card slot for SD and SDHC cards up to 16 GB
- Almost all brand manufacturers
- FAT32 file system, short (8.3) file name
- Files directly readable on PC