Data logger "2.0 Box": RS232
Data logger "2.0 Box" RS232 interface
This data logger stores data records of a RS232 interface to the SD card. The device is delivered ready for use. The data logger has a real time clock, so that the records can be provided with the storage time. By changing the script, the device can be programmed. The data logger has a D-Sub input.
The Avisaro RS232 data logger records your technical data from the RS232 interface on the SD card
- Data input via RS232 interface
- Additional functions: time stamp etc.
- Storage in infinite loop possible
- Recording format freely definable (binary, ASCII)
- Optional: WiFi for wireless data retrieval
M21133: Data logger (without accessories)
M25833: Data logger, 2x WAGO Terminal
M2R933: Data logger, 1x WAGO Terminal
Pre-installed is the "MR1" script (record all data as they are).
Quick Guide - a compact introduction to M2xx33
This is an overview guide on how to use the Avisaro device: QuickGuide (pdf)
Support: documentation, software and firmware
Complete technical documentation, firmware updates und PC software: Link (html)
- Storage medium (SD cards) :
-
- Card slot for SD and SDHC cards up to 16 GB
- Almost all brand manufacturers
- FAT32 file system, short (8.3) file name
- Files directly readable on PC
- Mechanical data "Box 2.0" :
-
- Dimensions: 50 x 72 x 24 mm
- Weight: 70 g
- Protection class: none
- Temperature range: -30 ° C to 85 ° C (check SD card for restriction)
- Power Supply - WAGO :
-
- Power Supply via WAGO Terminal
- Optional: Adapter from WAGO to D-Sub
- Versorgungsspannung: 6V - 32V DC
- Verbrauch: ca. 0.5 bis 2 W je nach Ausstatttung
- Echtzeituhr intern gepuffert
- Connection - WAGO Terminals :
-
- Two connection terminals type WAGO 734
- Industrial terminal for single cable
- Optional: Adapter from WAGO to D-Sub
- Alternative: 1x connection terminal type WAGO 734 and 1x RJ45 socket
- Power Supply D-Sub :
-
- Power supply via Barrel connector
- and optional D-Sub
- Supply voltage: 6V - 32V
- Consumption: approx. 0.5 bis 2 W depending on product options
- Buffered real-time-clock with build-in battery
- RS232 Interface :
-
- Industry standard RS232 interface(s)
- Baud rate 1200 bit/s to 1 Mbit/s
- Average processing rate max. 500 kbit/s
- 7/8 data bits, parity, stop bits
- D-Sub connector :
-
- Industry standard pin assignment
- One data interface
- Standard 9-pin D-sub connector (male)
- Power supply via cannon plug or D-Sub
