Gateway "4.0 Sky": CAN Bus
IoT/M2M Gateway with CAN bus interface
This IoT / M2M gateway forwards data from a CAN bus interface over a network. Receiving end can be a PC, a mobile device or another gateway device. Suitable networks are local networks, a direct one-to-one connection or data transmission through the internet. Beside a 'live' data connection, a store-and-forward setup can be configured using i.e. FTP server.
- Data input via CAN bus interface
- 'Live' data transmission or store-and-forward
- Forward text and binary data
- Regular TCP/IP or UDP/IP data transport
- High level protocoll such as MQTT and FTP
Quick Guide - a compact introduction to M43xx4/C43xx4This is an overview guide on how to use the Avisaro device: QuickGuide (pdf)
Support: documentation, software and firmwareComplete technical documentation, firmware updates und PC software: Link (html)
- D-Sub connector :
-
- Industry standard pin assignment
- One data interface
- Standard 9-pin D-sub connector (male)
- Power supply via cannon plug or D-Sub
- Storage medium (USB sticks) :
-
- Slot for USB memory up to 256 GB
- All brands possible
- FAT32 file system, short (8.3) file names
- Files can be read directly on the PC
- Mechanical data ("4.0 Sky") :
-
- Measurements: 83 x 80 x 30 mm (single deck)
- Stackable up to 4 stories
- Weight: 110g
- Ingress protection: none
- Temperature range: -30°C to 85°C - check storage medium
- Power Supply D-Sub :
-
- Power supply via Barrel connector
- and optional D-Sub
- Supply voltage: 6V - 32V
- Consumption: approx. 0.5 bis 2 W depending on product options
- Buffered real-time-clock with build-in battery
- WiFi Interface (opt.) :
-
- Industry standard 802.11 b/g/n
- SoftAP, infrastructure mode
- 2.4 GHz band, 250m/50m range
- Security: WPA, WPA2
- Connection - WAGO Terminals :
-
- Two connection terminals type WAGO 734
- Industrial terminal for single cable
- Optional: Adapter from WAGO to D-Sub
- Alternative: 1x connection terminal type WAGO 734 and 1x RJ45 socket
- CAN Bus interface :
-
- Industry standard CAN Bus
- Message format 2.0A and 2.0B
- CAN baud rate 33kbit/s to 1Mbit/s
- Average throughput max 500kbit/s
- Configurable filter
- Power Supply - WAGO :
-
- Power Supply via WAGO Terminal
- Optional: Adapter from WAGO to D-Sub
- Versorgungsspannung: 6V - 32V DC
- Verbrauch: ca. 0.5 bis 2 W je nach Ausstatttung
- Echtzeituhr intern gepuffert
