Firmware "Serie 4.0" - DWO Data Logger

• Added: Support for windshield wiper detection
• Added: Entry for vehicle identification (FIN or license plate)

Required: "4.0 PC Companion" Software, Version 3.16  <Link> 

• Fixed: Alignment Procedure
• Fixed: Analog ports input
• Fixed: IMU init issues (2nd)
• Changed PT1x calibration mode
• Fixed the occasional shift in temperature  
• Added: Buzzer Threshold to avoid early release
• Added: Extended Buzzer Debug 

Required: "4.0 PC Companion" Software, Version 3.16  <Link> 

• Added & Updated: "Curbestone Test"
• Changed: WiFi enabled again

• Fixed: Alignment Procedure
• Fixed: Analog ports input
• Fixed: IMU init issues (2nd)
• Changed PT1x calibration mode
• Fixed the occasional shift in temperature  
• Added: Buzzer Threshold to avoid early release
• Added: Extended Buzzer Debug 

Required: "4.0 PC Companion" Software, Version 3.16  <Link> 

• Added: Day trip meter shown in the display
• Added: Customer-specific GPS feature
• Added: Config speed limit via USB stick
• Added: R117 buzzer at speed limit
• Added: 'at home' detection and automatic Wifi-Download

• Changed: File name contains 8 chars of Driver ID
• Changed: Time sync to GPS at 1 min deviation

• Changed: GPS sampling rate to 10Hz
• Changed: Drive-In robust to GPS non-fixes 
• Changed: CAN-1 baudrate customisable

• Added & Updated: "Curbestone Test"
• Changed: WiFi enabled again
• Fixed: WiFi and PT100 conflict
• Required "DWO Display" version 2.82 or later
• Required "PC Companion" version: 2.82 or later

• Changed: PT100 to manual zero and gain adjustment
• Added: Oversampling PT100 for noise reduction
• Required "PC Companion" version: 2.77 or later

• Changed: Reduced temperature range to smaller 20 for drive-in
• Changed: Reduced time period for time sync window[nbsp]
• Fixed: String termination for DriverID and Testplan
• Fixed: Z-Gyro does not contain temperature anymore
• Required "PC Companion" version: 2.74 or later 

• Added: "Buzzer" if no USB stick while driving
• Added: "to warm" for drive-in procedure if above 40 degree
• Added: Additional checks during USB stick mounting
• Fixed: PT100 support
• Fixed: Middle position for bargraph when low limits are used
• Fixed: No more two "Power Marker" in a row
• Fixed: GPS error during drive-in procedure