Data logger "4.0 Sky": RS232
Data logger with RS232 interface to USB stick
This data logger stores data records of one or two RS232 interfaces on USB storage media. The device is delivered ready for use. The data logger has a real time clock, so that the data sets can be provided with the storage time additionally.
The Avisaro data logger RS232 saves your technical data from the RS232 interface to USB stick.
- Data input via RS232 interface
- Additional functions: Time stamp etc.
- Storage in infinite loop possible
- Recording format freely definable (binary, ASCII)
- Optional: WLAN for wireless data retrieval
Quick Guide - a compact introduction to M41xx4/C41xx4This is an overview guide on how to use the Avisaro device: QuickGuide (pdf)
Support: documentation, software and firmwareComplete technical documentation, firmware updates und PC software: Link (html)
- D-Sub connector :
-
- Industry standard pin assignment
- One data interface
- Standard 9-pin D-sub connector (male)
- Power supply via cannon plug or D-Sub
- RS232 Interface :
-
- Industry standard RS232 interface(s)
- Baud rate 1200 bit/s to 1 Mbit/s
- Average processing rate max. 500 kbit/s
- 7/8 data bits, parity, stop bits
- Storage medium (USB sticks) :
-
- Slot for USB memory up to 256 GB
- All brands possible
- FAT32 file system, short (8.3) file names
- Files can be read directly on the PC
- Mechanical data ("4.0 Sky") :
-
- Measurements: 83 x 80 x 30 mm (single deck)
- Stackable up to 4 stories
- Weight: 110g
- Ingress protection: none
- Temperature range: -30°C to 85°C - check storage medium
- Power Supply D-Sub :
-
- Power supply via Barrel connector
- and optional D-Sub
- Supply voltage: 6V - 32V
- Consumption: approx. 0.5 bis 2 W depending on product options
- Buffered real-time-clock with build-in battery
- WiFi Interface (opt.) :
-
- Industry standard 802.11 b/g/n
- SoftAP, infrastructure mode
- 2.4 GHz band, 250m/50m range
- Security: WPA, WPA2
- Connection - WAGO Terminals :
-
- Two connection terminals type WAGO 734
- Industrial terminal for single cable
- Optional: Adapter from WAGO to D-Sub
- Alternative: 1x connection terminal type WAGO 734 and 1x RJ45 socket
- Power Supply - WAGO :
-
- Power Supply via WAGO Terminal
- Optional: Adapter from WAGO to D-Sub
- Versorgungsspannung: 6V - 32V DC
- Verbrauch: ca. 0.5 bis 2 W je nach Ausstatttung
- Echtzeituhr intern gepuffert
