Data logger "4.0 Sky": CAN Bus
Data logger with CAN bus interface
This data logger stores data records from two independent CAN bus interfaces to USB storage media. The device is delivered ready to use. The data logger has a real-time clock, so that the data can be time stamped if required. Different data storage formats makes the logger versatile. The datalogger has a D-Sub input with industry standard pin layout.
The Avisaro data logger CAN stores your technical data from an CAN bus interface to a USB memory stick.
- Data input via CAN interface
- Configurable options: time stamp, ...
- Storage in single file, one file per day, or infinite loop
- Selection of storage formats (binary, ASCII)
- Optional: Wifi for wireless data retrival or streaming
Quick Guide - a compact introduction to M43xx4/C43xx4This is an overview guide on how to use the Avisaro device: QuickGuide (pdf)
Support: documentation, software and firmwareComplete technical documentation, firmware updates und PC software: Link (html)
- D-Sub connector :
-
- Industry standard pin assignment
- One data interface
- Standard 9-pin D-sub connector (male)
- Power supply via cannon plug or D-Sub
- Storage medium (USB sticks) :
-
- Slot for USB memory up to 256 GB
- All brands possible
- FAT32 file system, short (8.3) file names
- Files can be read directly on the PC
- Mechanical data ("4.0 Sky") :
-
- Measurements: 83 x 80 x 30 mm (single deck)
- Stackable up to 4 stories
- Weight: 110g
- Ingress protection: none
- Temperature range: -30°C to 85°C - check storage medium
- Power Supply D-Sub :
-
- Power supply via Barrel connector
- and optional D-Sub
- Supply voltage: 6V - 32V
- Consumption: approx. 0.5 bis 2 W depending on product options
- Buffered real-time-clock with build-in battery
- WiFi Interface (opt.) :
-
- Industry standard 802.11 b/g/n
- SoftAP, infrastructure mode
- 2.4 GHz band, 250m/50m range
- Security: WPA, WPA2
- Connection - WAGO Terminals :
-
- Two connection terminals type WAGO 734
- Industrial terminal for single cable
- Optional: Adapter from WAGO to D-Sub
- Alternative: 1x connection terminal type WAGO 734 and 1x RJ45 socket
- CAN Bus interface :
-
- Industry standard CAN Bus
- Message format 2.0A and 2.0B
- CAN baud rate 33kbit/s to 1Mbit/s
- Average throughput max 500kbit/s
- Configurable filter
- Power Supply - WAGO :
-
- Power Supply via WAGO Terminal
- Optional: Adapter from WAGO to D-Sub
- Versorgungsspannung: 6V - 32V DC
- Verbrauch: ca. 0.5 bis 2 W je nach Ausstatttung
- Echtzeituhr intern gepuffert
