Data logger "2.0 Box": CAN
This data logger stores CAN data via a standard D-Sub connector on the SD card. The device is delivered ready for use. The data logger has a real time clock, so that the records can be provided with the storage time. Through the exchange of the script, the device can be programmed.
The Avisaro CAN data logger records your technical data from the CAN interface to the SD card
- Automatic Datenloggerfunkion
- Data input via CAN interface
- Timestamp can be activated
- CAN Filter for records by ID's
- Transmission of CAN messages (query of devices on the bus)
- Recording format is selected: ASCII (CSV format), binary, CANoe
- Optional: WiFi for wireless data retrieval
M23133: Data logger (without accessories)
M26833: Data logger, 2x WAGO Terminal
M2C933: Data logger, 1x WAGO Terminal
Pre-installed is the "MC5 " script (Data with timestamp as CSV)
Quick Guide - a compact introduction to M2xx33This is an overview guide on how to use the Avisaro device: QuickGuide (pdf)
Support: documentation, software and firmwareComplete technical documentation, firmware updates und PC software: Link (html)
- Storage medium (SD cards) :
-
- Card slot for SD and SDHC cards up to 16 GB
- Almost all brand manufacturers
- FAT32 file system, short (8.3) file name
- Files directly readable on PC
- Mechanical data "Box 2.0" :
-
- Dimensions: 50 x 72 x 24 mm
- Weight: 70 g
- Protection class: none
- Temperature range: -30 ° C to 85 ° C (check SD card for restriction)
- Power Supply - WAGO :
-
- Power Supply via WAGO Terminal
- Optional: Adapter from WAGO to D-Sub
- Versorgungsspannung: 6V - 32V DC
- Verbrauch: ca. 0.5 bis 2 W je nach Ausstatttung
- Echtzeituhr intern gepuffert
- CAN Bus interface :
-
- Industry standard CAN Bus
- Message format 2.0A and 2.0B
- CAN baud rate 33kbit/s to 1Mbit/s
- Average throughput max 500kbit/s
- Configurable filter
- Connection - WAGO Terminals :
-
- Two connection terminals type WAGO 734
- Industrial terminal for single cable
- Optional: Adapter from WAGO to D-Sub
- Alternative: 1x connection terminal type WAGO 734 and 1x RJ45 socket
- Power Supply D-Sub :
-
- Power supply via Barrel connector
- and optional D-Sub
- Supply voltage: 6V - 32V
- Consumption: approx. 0.5 bis 2 W depending on product options
- Buffered real-time-clock with build-in battery
- D-Sub connector :
-
- Industry standard pin assignment
- One data interface
- Standard 9-pin D-sub connector (male)
- Power supply via cannon plug or D-Sub
